Configuring A G350 Without An S8300 Media Server - Avaya G350 Quick Start For Hardware Installation

Prepare for Configuration

Configuring a G350 without an S8300 Media Server

You use the Gateway Installation Wizard (GIW) to configure the Avaya G350 Media Gateway
without an S8300. You can perform the configuration on site, or prepare the G350 for a remote
configuration.
To configure the G350 using GIW:
1. Install the GIW software on your laptop. You can download the GIW software from the
Avaya support Web site, at http://support.avaya.com/avayaiw/download.html.
2. Connect the flat RJ-45 to RJ-45 cable to the DB-9 cable adapter.
3. Plug the RJ-45 cable into the Console port of the G350 (labeled CONSOLE).
4. Plug the DB-9 end of the cable into a COM port of the laptop.
5. Double-click the GIW icon on the laptop to open the Gateway Installation Wizard. The
Overview screen appears.
6. Click Continue. The COM Port Selection screen appears.
7. Select the COM port you are using on the laptop to connect to the G350 from the COM Port
drop down list.
Note:
Not every COM port works with every laptop. If you have trouble connecting
Note:
using the COM port you have selected, try a different COM port.
8. Click Continue. The Wizard Usage Options screen appears.
9. To perform an on site configuration using the GIW, continue with the next section. To
prepare for a remote configuration, continue with
G350 on page 33.
To configure the G350 on site:
1. From the Wizard Usage Options screen, select Continue the installation using this
wizard, and click Continue.
2. On the Initialize Components screen, check the options that are appropriate for your
installation.
3. On the Import EPW screen, import the Electronic Pre-Installation Worksheet (EPW) that
was prepared.
32 Quick Start for Hardware Installation Avaya G350 Media Gateway
Preparing for a remote configuration of the