Envelopes - Xerox WorkCentre 5945 User's Manual And Warranty

Paper and Media
Labels should be left in the printing environment for 72 hours before being used in the printer to
allow them to adjust to the ambient temperature.
Leave labels sealed in their plastic wrapping until they are ready to be loaded into the printer.
Note: Do not fan the label sheets before use unless the package instructs you to do so. If jamming
or multi-sheet feeding occurs shuffle the labels before loading. Labels can only be printed 1-sided.
Note: Dry gum labels can cause dry particles of glue to detach from the backing and should not be
used.

Envelopes

The device supports diamond/banker, pocket and wallet envelopes. Lightweight and medium
weight are acceptable and envelope seals can be gummed or press and seal.
The following envelope sizes are supported:
• DL (Wallet) and C5 (Wallet and Pocket)
• Monarch and #10 (Wallet)
• Custom Sizes (less reliable feed and image quality)
Note: Do not feed window, board backed, gusset type, padded or peal and seal envelopes, or
envelopes with triangular flaps.
More Information
Storing Paper and Other Media
Loading Tray 1 and Changing the Tray Settings
Loading Tray 2 and Changing the Tray Settings
Loading Tray 3
Loading Tray 4
Loading the Bypass Tray and Changing the Tray Settings
656
®
WorkCentre 5945/5955
User Guide