Xerox WorkCentre 5945 User's Manual And Warranty page 388

Print
Select Standard from the Booklet Margins menu to create a margin between each image
•
on your booklet.
• If required, select None to cancel any programming you have made.
• Select the Gutter entry box and use your keyboard to enter a width for the center margin
of your booklet.
Select the Creep entry box and use your keyboard to enter an amount to shift the page
•
images outwards by. This feature compensates for the fact that the outer pages in a large
booklet have to fold around all the inner pages, this makes the outer pages slightly shorter
than the inner pages in the final booklet.
• Select the Reading Order option required.
- Left to Right places page 1 of your document on the front of your booklet when the
fold is to the left or top of the booklet.
- Right to Left places page 1 of your document on the front of your booklet when the
fold is to the right or bottom of the booklet.
• Click the OK button.
9. If required, check the Page Borders checkbox to print a border around each image.
10. Click the OK button.
11. Click the OK button to save your settings.
12. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the OK or Print button.
13. Collect your job from the device.
14. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
15. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the Release button.
16. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Printing a Document using the PostScript Print Driver
System Administrator Guide
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu
Folding Booklets using the PostScript Print Driver Layout Options
You can print to the device from your computer through a print driver. There are a variety of Xerox
print drivers available for the device to support all the popular operating systems. The Xerox print
drivers allow you to use the specific features available on your device.
If Authentication has been enabled on your device you may have to login at the device to see or
release your jobs.
If Accounting has been enabled you may have to enter login details at the print driver before you
can send your job.
Depending on the optional finishing device and kits installed you will have the choice of different
output options such as stapling, folding and collating.
386
www.xerox.com/support.
®
WorkCentre 5945/5955
User Guide