Creating Copies With An Inverted Image - Xerox WorkCentre 5945 User's Manual And Warranty

Copy
Either
- Select the Side 2 button.
- Select the Top, Right, Bottom and Left entry boxes as required and use the arrow
buttons to adjust the amount to be erased from 3mm (0.1") to 50mm (2.0") or use the
numeric keypad to enter the amount required.
Or
Check the Mirror Side 1 entry checkbox to reverse the side 1 settings on side 2.
-
Depending on the page orientation the left and right or top and bottom settings will
be reversed.
8. Select the OK button.
9. Enter the number of prints required using the numeric keypad on the control panel.
10. Press the Start button on the control panel to scan the original.
11. Remove the original from the document feeder or document glass when scanning has
completed. The job enters the job list ready for processing.
12. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
13. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Using a User ID to Log In at the Device
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu

Creating Copies with an Inverted Image

When you press the Start button to make a copy, the device scans your originals and temporarily
stores the images. It then prints the images based on the selections made.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Copy features.
Use the Invert Image options to create a mirror image or a negative image. This feature is useful
for originals that have a substantial amount of dark background or light text and images.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All button on the control panel to cancel any previous programming selections.
3. Press the Services Home button.
4. Select the Copy button on the touch screen. The copy features are displayed.
5. Select the Layout Adjustment tab.
6. Select the Invert Image button.
7. Select the Mirror Image option required.
User Guide
®
WorkCentre 5945/5955
105