Xerox WorkCentre 5945 User's Manual And Warranty page 359

Print
4. Open the print driver Properties window - the method will vary depending on the application
you are printing from. From most Microsoft applications select the Properties or Preferences
button to open the window.
5. If required, click the Printing Options tab. This is usually the active tab when the print driver
opens.
6. Select Normal Print from the Job Type dropdown menu.
7. Select the option(s) required.
8. Click the OK button.
9. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the OK or Print button.
10. Collect your job from the device.
11. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
12. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the Release button.
13. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Printing a Document using the PostScript Print Driver
Using the Job Type Feature with the PostScript Print Driver
Viewing Active Jobs using the Job Status Menu
System Administrator Guide
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu
Printing a Secure Print Job using the PostScript Driver
You can print to the device from your computer through a print driver. There are a variety of Xerox
print drivers available for the device to support all the popular operating systems. The Xerox print
drivers allow you to use the specific features available on your device.
If Authentication has been enabled on your device you may have to login at the device to see or
release your jobs.
If Accounting has been enabled you may have to enter login details at the print driver before you
can send your job.
Use the Secure Print option to have your job held at the device until you enter a passcode to release
it. This feature prevents confidential documents printing to the output tray until you are ready to
release and collect them. This feature is also useful if you want to control when your jobs are
released for printing, even if they are not confidential.
User Guide
www.xerox.com/support.
®
WorkCentre 5945/5955
357