Xerox WorkCentre 5945 User's Manual And Warranty page 112

Copy
Blank Cover provides a blank sheet as the cover.
•
• Print on Side 1 prints an image on side 1 of the cover.
• Print on Side 2 prints an image on side 2 of the cover. Select Rotate Side 2 to rotate the
image on the second side.
• Print on Both Sides prints an image on both sides of the cover. Select Rotate Side 2 to
rotate the image on the second side.
14. Select the Paper Supply required for the selected covers. If required, select the More... button
to access options not listed on the main page.
15. Select the OK button.
16. Select the OK button.
17. Enter the number of prints required using the numeric keypad on the control panel.
18. Press the Start button on the control panel to scan the original.
19. Remove the original from the document feeder or document glass when scanning has
completed. The job enters the job list ready for processing.
20. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
21. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Using a User ID to Log In at the Device
Building a Copy Job with Multiple Page or Segment Settings
Viewing the Progress and Details of a Job using the Job Status Menu
Loading Different Types of Media
Loading Tray 1 and Changing the Tray Settings
Loading Tray 2 and Changing the Tray Settings
Loading Tray 3
Loading Tray 4
Loading the Bypass Tray and Changing the Tray Settings
Adding Chapter Start Sections to Copies
When you press the Start button to make a copy, the device scans your originals and temporarily
stores the images. It then prints the images based on the selections made.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Copy features.
Use the Chapter Starts option to ensure that a chapter begins on the right or left side of the page,
with a blank page automatically inserted if needed.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All button on the control panel to cancel any previous programming selections.
3. Press the Services Home button.
110
®
WorkCentre 5945/5955
User Guide