Xerox WorkCentre 5945 User's Manual And Warranty page 406

Print
More Information
Printing a Document using the PostScript Print Driver
System Administrator Guide
Using Internet Services to find System Administrator Contact Details
Applying Saved Print Settings using the PostScript Print Driver
Renaming Saved Print Settings using the PostScript Print Driver
Deleting Saved Print Settings using the PostScript Print Driver
Applying Saved Print Settings using the PostScript Print Driver
You can print to the device from your computer through a print driver. There are a variety of Xerox
print drivers available for the device to support all the popular operating systems. The Xerox print
drivers allow you to use the specific features available on your device.
If Authentication has been enabled on your device you may have to login at the device to see or
release your jobs.
If Accounting has been enabled you may have to enter login details at the print driver before you
can send your job.
Use the Saved Settings option to apply a selection of print settings that you have already saved.
1. Open the document to be printed. From most applications select the Office button or select
File, then select Print from the file menu.
2. Enter the number of copies you want to produce. Depending on the application you are using
you may also be able to select a page range and make other print selections.
3. Select the Xerox PS driver from the list of print drivers available.
4. Open the print driver Properties window - the method will vary depending on the application
you are printing from. From most Microsoft applications select the Properties or Preferences
button to open the window.
5. Select the saved setting required from the Saved Settings menu.
6. Click the OK button.
7. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the OK or Print button.
8. Collect your job from the device.
9. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
10. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the Release button.
11. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
12. Collect your job from the device.
More Information
Printing a Document using the PostScript Print Driver
System Administrator Guide
Using Internet Services to find System Administrator Contact Details
404
www.xerox.com/support.
www.xerox.com/support.
®
WorkCentre 5945/5955
User Guide