Xerox WorkCentre 5945 User's Manual And Warranty page 169

Fax
Or
Lift up the document feeder. Place the first segment face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
17. Press the Start button on the control panel to scan the original.
18. Remove the first segment originals after they have been scanned. The Build Job screen displays
the first segment in the list.
19. If required, select the options for the segment.
• Delete Last Segment deletes the last segment scanned. You can continue programming
the Build Job.
• Delete All Segments deletes the current Build Job and returns you to the main Build Job
screen.
20. Select the Program Next Segment button.
21. Select the features required for the second segment.
22. Load the second segment originals.
23. Press the Start button on the control panel to scan the original.
24. Repeat these steps until all segments of your job have been programmed and scanned.
25. After the last segment has been scanned, select the Submit Job button.
26. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
More Information
Using a User ID to Log In at the Device
Explaining the Fax Options
Using Internet Services to find System Administrator Contact Details
System Administrator Guide
User Guide
www.xerox.com/support.
®
WorkCentre 5945/5955
167