Xerox WorkCentre 5945 User's Manual And Warranty page 475

Print
If Authentication has been enabled on your device you may have to login at the device to see or
release your jobs.
If Accounting has been enabled you may have to enter login details at the print driver before you
can send your job.
Use the Sample Set option to print one copy of a multiple-copy print job. When you collect the print
you can check it has printed as you expected before approving the rest of the job for printing. If the
first copy is not correct you can cancel the rest of the copies and resubmit the job with different
print settings.
1. Open the document to be printed. From most applications select File, then select Print from
the file menu.
2. Enter the number of copies you want to produce. Depending on the application you are using
you may also be able to select a page range and make other print selections.
3. Select the Xerox driver from the list of print drivers available.
Note: You must send at least 2 copies to the device for the Sample Set feature to work.
4. Select Xerox Features from the print driver properties menu - the name of the menu will vary
depending on the application you are printing from. From most applications select the
dropdown menu that states Copies and Pages, or that states the application name.
5. Select Paper / Output from the Xerox Features group selection menu. This is usually the active
area when the print driver opens.
6. Select Sample Set from the Job Type dropdown menu.
7. Select the option(s) required.
8. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the OK or Print button.
9. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
10. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. Select the job in the required list and select the Release button to
print the sample set.
11. Check the printed sample is correct.
12. Select the job required from the list.
• If the sample is correct, select the Release button to print the remaining sets.
• If the sample has not printed as you expected it to, select the Delete button.
13. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Printing a Document using the Mac Print Driver
Using the Job Type Feature with the Mac Print Driver
Viewing Active Jobs using the Job Status Menu
System Administrator Guide
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu
User Guide
www.xerox.com/support.
®
WorkCentre 5945/5955
473