LEGRAND D45 SYSTEM Installation Manual page 67

recommended pws soluTion and relaTed configuraTion
no. inStallation power
StatuS of SySteM Supply
Solution
alarm Small EP
1 none none 1
2 none none 1
3 have none 1
4 have none 1
5 none have 2
6 none have 2
7 have have 2
8 have have 2
Note:
(X:) It means no configurator is needed and the configuration position is 0; others need a configurator with corresponding value.
(√:) It means configuration is needed. For the configuration procedure refer to the system configuration chapter.
CF1~CF15 is the configuring position for 323005. For the detailed meaning and configuration method please check the system configuration chapter.
connecTion and seTup
procedure for 323005
(Set 323005 as system power supply)
Connector for 323005
WWW.LEGRAND.COM
configuration when power Supply iS SySteM power Supply
(impedance switch of Power supply must be ON)
CF1 CF4 CF12 CF13
~
~
CF3 CF11
(NNN) (Type) (ASR)
X X X X
X X X X
X X X X
NNN X 1 0.2~9
NNN √ 1 1
NNN √ 1 1
NNN √ 1 0.2~9
NNN √ 1 0.2~9
Difference for each connector
configuration of power Supply & apower Supply
when Power supply is assistant power supply
(impedance switch of Power supply must be OFF)
CF14 CF15 CF1
~
CF3
(M) (LE) (NNN)
X X
X X
Under these four condition, using auxiliary power supply no
X X
1 X
0/1 X X
0/1 X X
0/1 X X
0/1 X X
line power Video
colour connection connection
√
√
√
CF4 CF12 CF13 CF14
~
CF11
(Type) (ASR) (M)
need configurate
√ 2 1 0/1
√ 2 1 0/1
√ 2 0.2~9 0/1
√ 2 0.2~9 0/1
audio data
connection connection
√ √ √
√ √ √
√ √ √
D45 SyStEm GUIDE
CF15
(LE)
X
X
X
X
59