LEGRAND D45 SYSTEM Installation Manual page 62

GENERAL RULES FOR INSTALLATION
Accessory configuration examples
323005 - power supply
configuraTion choosing
The sysTem power soluTion
„ Solution 1: PWS 323005 will be
„
chosen as system power supply
inside the riser while auxiliary PWS
(323010) will be chosen for all the
auxiliary power supply.
Suggested power supply solution and related configuration:
no. SySteM
alarM SMall
ep
1 No No
2 No No
3 Yes No
4 Yes No
5 No Yes
6 No Yes
7 Yes Yes
8 Yes Yes
Note
X: it means no configurator is needed and the configuration position is 0; others need a configurator with corresponding value.√: It means configuration is needed. For the
configuration procedure refer to the system configuration chapter.
54
„ Solution 2: PWS 323005 will be
„
chosen for both system power
supply inside the riser and auxiliary
power supply.
pwS configuration when pwS iS SySteM power Supply
Solution (iMpedance Switch of pwS MuSt Be on)
cf1 cf4 cf12
~ ~
cf3 cf11
(nnn) (type)
1 X X
1 X X
1 X X
1 NNN X
2 NNN √
2 NNN √
2 NNN √
2 NNN √
cf13 cf14 cf15
(aSr) (M) (le)
X X X X
X X X X
X X X X
1 0.2 – 9 1 X
1 1 0/1 X
1 1 0/1 X
1 0.2~9 0/1 X
1 0.2~9 0/1 X
Note: when the system includes Small EP, solution
2 will be helpful to avoid possible damage to the
power supply in the system. When the system has
handsets connected to Small EP, sometimes if several
Small EP call handsets at the same time, a power
supply overload may occur. Under this situation
there is a risk of damage to the power supply.
configuration of pwS and auXiliary pwS when pwS
iS auXiliary power Supply
(iMpedance Switch of power Supply MuSt Be off)
cf1 cf4 cf12 cf13
~ ~
cf3 cf11
(nnn) (type) (aSr)
Here use Auxiliary Power supply, configuration is not necessary.
X √ 2 1
X √ 2 1
X √ 2 0.2 – 9
X √ 2 0.2 – 9
cf14 cf15
(M) (le)
0/1 X
0/1 X
0/1 X
0/1 X