Signal Key Mode (As Of Sw Version 2.0.2); Night Service (As Of Sw Version 2.0.2) - Siemens Hicom 100 E Service Manual

Programming guide
System settings
10.7.11

Signal key mode (as of SW version 2.0.2)

A call from a DTMF or entry telephone is retrieved after being placed on consultation hold by
pressing the signal key once (default setting) and timeout. If necessary, you can set the number
of times the signal key is to be pressed to two. This means that the waiting time before retrieval
can be avoided.
Input sequence
A 2 1 8 (up to SW2.0.2)
2 1 18 (as of SW2.1)
B *
C 2
D <OK>
<F8>
E
The system can be reset to "press once" by entering "1" under point C.
10.7.12

Night service (as of SW version 2.0.2)

It is possible to limit the number of extensions with night service. Up to 5 authorised extensions
can be defined (stations 1–5).
If no extension is defined, all stations have night service.
Example: night service is to be enabled for extensions 11 and 23.
Input sequence
A 2 1 9 1 (up to SW2.0.2)
2 1 191 (as of SW2.1)
B *
C 11
D <OK>
+
E
F *
23
G
H <OK>
J <F8>
Night service can be enabled for other stations by entering other ext. numbers under point C
and G.
10-64
Meaning
Signal key mode
Change input
Select press twice
Confirm input
Return to Start menu
Night service, station 1
(select station 1-5 with "+" and "–" or
directly with #)
Change input
Enter ext. 11
Confirm input
Scroll to station 2
Change input
Enter ext. 23
Confirm input
Return to Start menu
Meaning
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
Display
Retrieve: press once
Retrieve:
Retrieve: press twice
Retrieve: press twice
System administration
Display
Station 1: –
Station 1:
Station 1: 11
Station 1: 11
Station 2: –
Station 2:
Station 2: 23
Station 2: 23
System
administration
,
07/99