Caracas Desk Basic Settings; Setting The Extension Number Plan In Hicom 118 - Siemens Hicom 100 E Service Manual

Plus products
Entrance telephones
11.4.3

Caracas Desk basic settings

The basic settings are password-protected. Password: 51695 (cannot be changed!).
The password should not be revealed to customers!
11.4.3.1

Setting the extension number plan in Hicom 118

The extension numbers are always identical to the room numbers. The extension numbers in
Hicom 118 must correspond to the extension numbers set in Caracas Desk.
The extension numbers can be assigned in two manners.
1. Using Assistant L (fbzadmin.exe):
Extension numbers in Hicom 118 can be assigned in the usual manner with Assistant L
(directly via the Hicom 118 V.24 interface).
The current extension numbers are loaded into Caracas Desk via the "Settings", "Basic
settings", "Load customer data" menus. This procedure lasts approx. 3 minutes.
Completion of the loading operation is indicated by a flashing LED beside the "Message"
key. The result (OK, error) can be queried and the message deleted by pressing this key.
An extension number must be configured for extensions 73 and 74.
2. With Caracas Desk - without using Assistant L
The extension numbers can also be set when defining the extension types.
11.4.3.2 Trunk access for guest telephones in Hicom 118
The extensions with port numbers 73 and 74 (7th and 8th slave of the 3rd expansion module)
are used as "templates" for trunk access. Trunk access cannot, therefore, be set as required for
any telephones connected to these ports.
An extension number which is not required must be assigned to the extensions with port
numbers 73 and 74.
The extension numbers for extensions with port numbers 73 and 74 must be changed if So
buses without separate MSN assignment are used in the system. Otherwise, there will be
collisions with the default extension numbers of the So buses.
The extension with port number 73 in Hicom 118 is to be granted the level of access which
a guest telephone without unrestricted trunk access should receive (e.g. all lines outward
restricted).
The extension with port number 74 in Hicom 118 is to be granted the level of access that
a guest telephone with unrestricted trunk access should receive (e.g. all line unrestricted
trunk access).
Load the current extension numbers to Caracas Desk via the "Settings", "Basic settings",
"Load customer data" menus.
11-18
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99