Dtmf Release Class Of Service - Siemens Hicom 100 E Service Manual

10.5.3.5

DTMF release class of service

Each individual extension can be assigned authorisation to release/cancel the DTMF door
opener feature.
Example: ext. 13 is authorised to release/cancel the DTMF feature.
Input sequence
A 2 3 5
B +
C +
D *
E 1
<OK>
F
G <F8>
Authorisation to release the DTMF door opener feature can be cancelled by entering "0"
under point E.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Door release, DTMF for door 11
(select door 11 to 74 with "+" and "–"
or directly with "#")
Release class of service for ext. 12
Release class of service for ext. 13
Change input
Door release, enable DTMF
Confirm input
Return to Start menu
Programming guide
Station attributes
Display
Door 11: not enabled
Door 12: not enabled
Door 13: not enabled
Door 13:
Door 13: enabled
Door 13: enabled
System administration
10-29