Siemens Hicom 100 E Service Manual page 163

Administration and maintenance
Overview of configuration parameters
Configuration items
Alerting tone for conference
(as of V2.0.2)
Alerting ring for call pickup groups
(as of V2.0.2)
Doorbell call follows DVN
(as of V2.0.2)
Display when transferred
(as of V2.0.2)
Display when recalled
(as of V2.0.2)
Display name or
ext. number (as of V2.0.2)
Data compression of display mes-
sage for each extension
DTMF remote AM
(as of V2.0.2)
PIN code for remote admin.
(as of V2.0.2, accessible for cus-
tomers)
PIN code for remote admin.
(as of V2.0.2)
ISDN remote AM
release
Other access for remote AM
Automatic switchover to DTMF after
CONNECT (as of V2.1)
Doorphone setup
Entrance telephone(s)
(4 entrance telephone possible as
of V2.0.2)
Receiving extension(s) for doorbell
Table 7-5 System configuration via PC and/or programming telephone
7-32
Default
on on/off system-wide
on on/off system-wide
no yes/no system-wide
who
transfer Caller/transfer dest.
dest.
name Name/ext. number system-wide
yes
no master, slave, master + slave
XXXXXX 6-digit access code can be entered
(no
access)
PIN code reset to default value
pro- 0=procedure/1=logon without
cedure code, 2=logon with code
pro 0=procedure/1=logon without
cedure code, 2=logon with code
no yes/no system-wide
Ext. number, max. 5 characters
max. 5 characters
Entries
who/from whom
yes/no
by the customer
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
PC Term.
CDM
menu
x 21 171
x 21 172
x 23 4
x 18 19
x 18 18
x 18 17
x 18 20
x 30 1
User
data
20
30 6
30 2
30 3
x 21 20
x 23 1
x 23 2
,
07/99