Date For Updating The Call Cost Limit For An Extension; Updating The Software; Sw Information - Siemens HiPath 1100 Series Programming Manual

Step by Step
Date for Updating the Call Cost Limit for an
Extension
This specifies a day for resetting the Call Charge limit.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 4 5
Enter a day for resetting the limit (01 to 31).
d d
or
*
To deactivate
Initial state for Programming Mode.

Updating the Software

SW Information

This displays information about the system's software.
To view this information use a system telephone with a
display.
Required: Programming Mode must be active (*95
31994).
Enter the programming code to view the name of the
0 0 1
product, e.g., "HiPath 1150.
* Press the key to view additional information:
1) Release
2) Version
3) APS
4) Serial number
Press this key.
#
Initial state for Programming Mode.
If 31 is entered, the Call Charge limit will be reset
to the last day of each month.
General Programming
85