Outgoing Traffic, General (As Of Sw 2.0.2) - Siemens Hicom 100 E Service Manual

Features

Outgoing traffic, general (as of SW 2.0.2)

Feature
Silent call
Hunting group, linear
Hunting group, cyclic
Reject a call
Call pickup from answering machine
Fax information
4.5 Outgoing traffic, general (as of SW 2.0.2)
Feature
Code lock, individual
DTMF transmission
Systemwide option in programming
4-4
For U extensions > no acoustic signal, display only
P0/E
(as of SW 2.0.2)
as of SW 2.1: a one-time alerting tone is applied
Call directed to 1st member of hunting group. An
extension can be excluded by following a defined
procedure (as of SW 2.0.2)
Call directed to next free member of hunting group. An
extension can be excluded by following a defined
procedure (as of SW 2.0.2)
Although an incoming call is signalled, another
outgoing line can be seized
Any user can pickup a call being recorded onto an
answering machine
Optical signal that a fax message has been received
When lock is activated, direct trunk access is reduced
to outward-restricted and central abbreviated dialling.
Level of access can be changed (as of SW 2.0.2)
Can only be activated by procedure:
Pushbutton telephone – after line seizure + dialogue
menu or code
Normal telephone (DP) – only after external dial +
timeout + code
Can be transmitted by DTMF:
Normal telephone (DTMF) – after trunk seizure +
signal key + code
Hicom 100 E Version 2.1, Service manual
Remarks
Remarks
A31003-K16-X001-3-7620
,
07/99