Multiplexers; Pc Cards - Siemens Hicom 100 E Service Manual

Line feed : number of linefeeds at the start and end of a page. Single page feed: enter * to
end line feed.
Automatic query: query the feature statuses, e.g. all occupied rooms.
Default language: currently only German.
Acoustic alarm: an alerting tone is output (e.g. guest cannot be woken up).
Hotel data: hotel name and address for invoices. Maximum four lines with 24 digits each.
11.5

Multiplexers

Within the framework of system networking (branch concept), multiplexers are used to com-
press calls via a dedicated line from a master PBX (e.g. Hicom 300) to a slave PBX (Hicom 100
E). For more information, please refer to the appropriate manufacturer specifications.
The following multiplexer types are available at present:
Multiplexer
DATUS 5810 / 20S
SIMUX 3612
RAD Kilomux 2000
11.6

PC cards

PC cards are installed between the PC and Hicom 100 E for video and data communication.
Install an S bus (master only, no slave) in Hicom 100 E. Moreover, configure appropriate MSNs
0
for the picture telephone selection.
The PBX <-> PC card connection is set up using the V.24 adapter cable.
For more information, please refer to the appropriate manufacturer specifications.
The following PC cards are available at present:
Smart Set
I-View
Picture Tel
Videokit
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Connection to Hicom 100 E
Configure S port as CorNet port (code 19 3)
0
Configure S port as CorNet port (code 19 3)
0
Configure S port as CorNet port (code 19 3)
0
Plus products
Multiplexers
11-21