Administration And Maintenance; Configuring The System; Functions Without An Access Code; Figure 7-1 User Data Codes - Siemens Hicom 100 E Service Manual

7

Administration and maintenance

7.1

Configuring the system

The system is supplied with all user-configurable system parameters set to their default values.
This means that the system can be used as soon as it is booted. The user-programmable keys
of the terminals are thus assigned default features and/or user numbers.
Some of the settings in this initial configuration can be individually activated, deactivated and
configured at the terminals. Certain system-wide features, in contrast, can be configured only
by a user who enters a special access code at a system telephone with the class of service for
programming (U
P0/E
Names can be entered only via a programming telephone with an alphanumeric keypad.
7.2

Functions without an access code

Can be activated from extensions 11 or 12 Figure 7-2.
95
*
Enter the code for
"System administration"
Code
SW 2.0.1+
optiset E memory
1
2
3
4
5
6
7
8
–
–
Figure 7-1 User data codes
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
with the internal extension number 11 or 12).
Observe display: scroll to "User
data?" and confirm
Code
SW 2.0.2/2.1
advance
11 1
12 2
13 3
14 4
15 –
16 –
–
17
18 –
19 –
20 6
Administration and maintenance
Central abbreviated dialling – see menu system or
code 12
Time – see menu system or code 18 3
Date – see menu system or code 18 4
Call charge recording – see menu system or code 11
Station names – see menu system or code 13 2
Group names – see menu system or code 16 3
Message texts – see menu system or code 18 1
Absence texts – see menu system or code 18 2
Texts for fax/DDI option
Code for remote administration
Configuring the system
Type
7-1