Add-On Modules For System Expansions - Siemens Hicom 100 E Service Manual

Contact
11
12
Table 3-11 Contact assignment of the MB interfaces 6/4 Hicom 118
3.5

Add-on modules for system expansions

The Hicom 108 has one slot for the TLA2 (analogue trunk) or STLS2 (S
The Hicom 112 has two slots (1 and 3) for system expansions.
The Hicom 118 has 4 slots for expanded system configurations. The modules can be inserted
in any of these slots. Refer to the relevant module descriptions for details of any restrictions.
Subsequent expansions carried out on the Hicom 118 should be installed following the new
equipping sequence for extension and trunk modules.
If slot 1 is assigned with an SLU8 (U
deactivated.
Module
SLAS16
SLAS8
SLAS4
SLU8
STLS4
STLS2
TLA8
TLA4
TLA2
*= see Section 12.3.2
Table 3-12 Add-on modules for system expansions
The above table only shows the possible slots. It does not illustrate the maximum configuration
possible or authorization-related restrictions.
Only SLAS8 modules can be inserted in slots 1 and 2. SLU modules must not be
inserted in slot 1.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Port X1
P0/E
Hicom 108 Hicom 108
NDL
-- --
--
-- --
-- --
-- --
1
-- --
--
1
Add-on modules for system expansions
Port X2
a6 - port 6
b6 - port 6
extension) or an SLAS16 (a/b extensions), slot 2 is
Hicom 112
slot
1, 3
3 --
--
--
1, 3
-- 1, 3
1, 3
1 1, 3
1 1, 3
Overview of modules
Port X3
) module.
o
Hicom 118 Hicom 118-2*
3, 4
1 - 4
1 - 4
3, 4
1 - 4
1 - 4
1 - 4
1 - 4
1 - 4
Port X4
3, 4, 6, 7, 8
1 - 8
1 - 8
3, 4
1, 2, 3, 4
1, 2, 3, 4
1 - 8
1 - 8
1 - 8
3-13