System Types - Siemens Hicom 100 E Service Manual

System data

System types

User Manual (SW 2.1)
System Support/Administration
Table 2-1 Documentation
Documentation is available from your Dealer.
2.4 System types
The systems are available in the following configurations:
Hicom 108 with one slot, 2 U
Hicom 112 with two slots, 4 U
Hicom 118 with four slots, 6 U
Nameplate on the housing base near the main distribution frame
A distinction is made between the following components:
Basic system, motherboard with V.24 interface via mini-DIN connector and optional EXM/
MPPI (external music on hold)
PSU1 power supply unit for Hicom 108 and 112 (see Section 3.8)
UPS1 uninterruptible power supply for Hicom 112 (see Section 3.8)
PSU2 power supply unit for Hicom 118 (see Section 3.8)
UPS2 uninterruptible power supply for Hicom 118 (see Section 3.8)
System expansions
The modular design permits almost any slot assignments (see Table 3-12).
SLAS subscriber line analogue with 4, 8 or 16 a/b interfaces
SLU 8 subscriber line U
STLS subscriber/trunk line S
TLA trunk line analogue with 2, 4 or 8 analogue trunk interfaces
Function expansions (see Section 3.6)
ALUM power failure transfer with 4 transfer options for analogue lines
Fax/DDI with announcement (DTMF)
GEE call-charge pulse recognition for 4 analogue trunk interfaces
SIB serial interface board (optional V.24 interface)
STRB control relay module with 4 control inputs and 4 control outputs
STBG4 current limiting module for France
WS48/ÜFS analogue DDI trunk for Austria
EXM/MPPI - module for MOH
2-4
Designation
and 4 a/b extension interfaces (see Figure 2-2)
P0/E
and 4 a/b extension interfaces (see Figure 2-3)
P0/E
and 4 a/b extension interfaces (see Figure 2-4)
P0/E
with 8 U
P0/E
with 4 S
0
A31003-K16-B546-*-19
German and other languages
(see above)
interfaces
P0/E
interfaces or 2 S
0
Hicom 100 E Version 2.1, Service manual
Item code number
interfaces
0
A31003-K16-X001-3-7620
,
07/99