Siemens Hicom 100 E Service Manual page 152

Codes
A B C
21
21 1 1 11
21 2 2 12
21 3
21 3 13
21 3 13
21 3 13
21 4
21 4 14
21 4 14
21 4 14
21 5 15
21 6 16
21 7 17
21 7 17
21 7 17
21 8 18
21 9 19
21 9 19
21 20
21 21
A B
= SW 2.0.1+; = SW 2.0.2;
Table 7-4 Codes for expert mode
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
System settings
Music on hold, 0 = off/1 = on, always MOH/ 2 = on, with ringtone on
transfer
Telephone directory 0 = off/1 = on (internal telephone directory up
to SW 2.0.1+ only)
V.24 setup, 1 = 2400 baud/2 = 9600 baud
V.24 setup
1 MB baud rate, 1 = 2400 baud/2 = 9600 baud
2 Port allocation, 1 = port for CDRC/2 = port for call charges/ext./3 =
port for call charges/line/4 = port for customer data output/5 = port
for call info
External diversion, call connected, 0 = on answer/1 = immediately
External diversion
1 Connect call, 0 = on answer/1 = immediately
2 Call forwarding, 0 = disabled/1 = enabled
Caller list mode, 1 = external only/2 = external, internal
Automatic line reservation, 0 = off/1 = on
Tones and rings
1 Conference alerting tone, 0 = off/1 = on
2 Call pickup alerting ring, 0 = off/1 = on
Signal key (retrieval), 1 = press x 1/2 = press x 2
Classes of service
1 Night service, enter ext. 1–5
Automatic DTMF, 0=no/1= yes
Extend undialed line, 0=no/1= yes
C
= SW 2.1
Administration and maintenance
System programming in expert mode
Function
7-21