Route Seizure - Siemens Hicom 100 E Service Manual

Programming guide
Networking
The digits "2" and "3" are then entered as route codes for route 2 (see "Route codes" Section
10.7.13.4).
Now activate digit repetition for route 2, see Figure 6-8 .
Input sequence
A 1 6 6 (up to
SW2.0.2)
1 6 16 (as of SW 2.1)
B +
C *
D 1
E <OK>
<F8>
F
Activated digit repetition can be deactivated by entering "0" under point D.
All Hicom 100E extensions can now reach the main PBX extensions simply by dialling the
appropriate 3-digit number (e.g. 256 or 402).
10.3.9

Route seizure

Linear route seizure (default) can be changed to cyclical route seizure for each route.
Example: lines in route 1 are to be seized in a cyclical manner.
Input sequence
A 1 6 7 (up to
SW2.0.2)
1 6 17 (as of SW 2.1)
B *
C 0
D <OK>
E <F8>
Seizure can be changed from cyclical to linear by entering "1" under point C.
10-14
Meaning
Digit repetition for route 1
(select route 1–4 with "+" and "–" or
directly with "#")
Digit repetition for route 2
Change input
Digit repetition ON
Confirm input
Return to Start menu
Meaning
Route seizure for route 1
(select route 1–4 with "+" and "–" or
directly with "#")
Change input
Cyclical seizure
Confirm input
Return to Start menu
Display
Route 1: off
Route 2: off
Route 2:
Route 2: on
Route 2: on
System administration
Display
Route 1: linear
Route 1:
Route 1: cyclical
Route 1: cyclical
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99