Programming A Receiving Extension For The Doorbell - Siemens Hicom 100 E Service Manual

Programming guide
Station attributes
10.5.2.3 Programming the receiving extension for the doorbell (up to SW 2.0.1+)
A call can be signalled at an extension or a group of extensions by pressing a de-energized
doorbell connected to the door opener adapter. The number of an extension or a pre-
programmed extension group must be entered as the receiving extension of the doorbell.
Example: ext.15 should ring when the doorbell is pressed.
Input sequence
A 2 3 2
B *
C 15
D <OK>
E <F8>
An activated doorphone destination can be deactivated by pressing the F3 key under point C.
10.5.2.4 Programming a receiving extension for the doorbell (as of SW version 2.0.2)
A call can be signalled at an extension or a group of extensions by pressing a de-energized
doorbell connected to the door opener adapter. The number of an extension or a pre-
programmed extension group must be entered as the receiving extension for the doorbell for
each door (1–4).
Example: ext. 11 should ring when the doorbell on door 1 is pressed, ext. 12 should ring when
the doorbell on door 2 is pressed
Input sequence
A 2 3 2
B +
C 11
D <OK>
E +
F *
G 12
H <OK>
J <F8>
10-26
Meaning
Receiving extension for doorbell
Change input
15 is receiving extension for doorbell
Confirm input
Return to Start menu
Meaning
Receiving extension for door 1
doorbell
(select door 1–4 with "+" and "–" or
directly with "#")
Change input
11 is receiving extension for door 1
doorbell
Confirm input
Scroll to door 2
Change input
12 is receiving extension for door 2
doorbell
Confirm input
Return to Start menu
Display
Ext. no.: –
Ext. no..
Ext. no.: 15
Ext. no.: 15
System administration
Display
Door 1: –
Door 1:
Door 1: 11
Door 1: 11
Door 2: –
Door 2:
Door 2 12
Door 2: 12
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99