Group Names - Siemens Hicom 100 E Service Manual

"Group ringing" is preprogrammed for all call groups (default setting).
Example overleaf.
Example: call group 883 is to be programmed as a "linear group call".
Input sequence
A 1 5 1 6 2
B #
C 883
D <OK>
E *
F 2
G <OK>
<F8>
H
One of the three possible ringing modes can be defined for a group by entering the ringing
mode types 1, 2 or 3 under point F.
10.6.2.3

Group names

A name can be assigned for each call group. This name will then appear on the caller's display
when this group is dialled.
An optiset (E) memory telephone is necessary for entering names!
Example: call group 883 is to be named "Sales".
Input sequence
A 1 5 1 6 3
B #
C 883
D <OK>
E *
F Sales
G <OK>
H <F8>
An assigned name can be deleted by pressing the F3 key under point F.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Ringing mode for group 881
(select group 881–888 by scrolling
with "+" and "–" or directly with "#")
Select group
Enter group 883
Confirm input
Change input
Linear group call
Confirm input
Return to Start menu
Meaning
Ringing mode of group 881
(select group 881 to 888 with "+" and
"–" or directly with "#")
Select group
Enter group 883
Confirm input
Change input
Name for group 883 = "Sales"
Confirm input
Return to Start menu
Programming guide
Station attributes
Display
Group 881: group
ringing
Group:
Group: 883
Group 883: grp ringing
Group 883:
Group 883: lin. grp. call
Group 883: lin. grp. call
System administration
Display
Group 881:
Group:
Group: 883
Group 883: –
Group 883:
Group 883: Sales
Group 883: Sales
System administration
10-41