Displaying The Call Duration; Name Display (As Of Sw Version 2.0.2); Display During Recall (As Of Sw Version 2.0.2) - Siemens Hicom 100 E Service Manual

Programming guide
System settings
Input sequence
Another language can be selected by entering one of the other codes (see above) under point
D.
10.7.14.5

Displaying the call duration

If an external call is in progress and call charge information is not recorded at the station, the
call duration is displayed by default on optiset telephones. Call duration display can be
deactivated.
The modification applies to the entire system.
Example: deactivate call duration display.
Input sequence
A 1 8 6 (up to SW 2.0.1+)
1 8 1 6 (as of SW 2.0.2)
B *
C 0
D <OK>
E <F8>
Call duration display can be activated by entering "1" under point C.
10.7.14.6

Name display (as of SW version 2.0.2)

Names entered for internal extensions or central abbreviated dialling destinations are displayed
by default. It is also possible to display the extension number only or the name with the
extension number.
Example: only the extension numbers are to be displayed.
Input sequence
A 1 8 1 7
B *
C 0
D <OK>
E <F8>
The display can also be set to name and ext. number by entering "2" under point C.
10.7.14.7

Display during recall (as of SW version 2.0.2)

In the case of a recall, the transfer destination appears on the display. Alternatively, the caller
can also be displayed.
10-70
Meaning
Meaning
Call duration display
Change input
Display = OFF
Confirm input
Return to Start menu
Meaning
Display name/ext. number
Change input
Select ext. number only
Confirm input
Return to Start menu
Display
Display
Status: on
Status:
Status: off
Status: off
System administration
Display
Display: name
Display:
Display: ext. no. only
Display: ext. no. only
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99