Configuration Options; Automatic Dtmf Switchover After "Connect; Enhanced Door Opener Functions - Siemens Hicom 100 E Service Manual

4.20.1.4

Configuration options

Key programming
A MUSAP key is programmed in the same way as other keys (code *91). Once the key has been
selected, the "Assign ext. number" feature is activated and the corresponding DDI is entered.
The digit analysis function assigns an extension port or a pseudo port to the external DDI in the
case of a group. An error message is output if no assignment exists.
The extension or pseudo port is used as a reference for DDI. In this way, it is possible to sub-
sequently modify the external DDI of the reference, without causing incorrect inputs in connec-
tion with seizure using a MUSAP key (CLIP transfers an external DDI that no longer exists).
System administration
The system administrator programs one of three available external ring types for each exten-
sion or pseudo port. The assignment of DDIs to extension PENs implicitly assigns external ring
types to DDIs.
Administration of call charge data
An information element IE_MUSAP is communicated in the Setup message for AOC for exten-
sion-specific and DDI-specific assignment of call charge data. This element contains the exten-
sion or pseudo port of which the DDI is transferred by CLIP to the outgoing seizure. This infor-
mation element is stored on the basis of the line task. This supports section-related processing
of call data in the case of features such as conference, shuttle, pickup or transfer.
4.20.2

Automatic DTMF switchover after "CONNECT"

The system can be configured to automatically switch over to DTMF mode after each outgoing
call has been successfully set up (CONNECT).
This feature is useful, for example, when retrieving answering machine messages remotely. In
this case, the "S" key (service) is always to be used to activate features during a call (not pos-
sible in the case of normal DP telephones).
4.20.3

Enhanced door opener functions

The door opener "Doorline M02" is supported.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Description of feature update in SW 2.1
Features
4-17