Codes; Substitute Code For - Siemens Hicom 100 E Service Manual

10.7.13

Codes

10.7.13.1

Substitute code for *

Since DP terminals cannot transmit "*", a substitute code of up to 2 digits is needed to activate
services. The default substitute code is "75".
This code can be changed (on the basis of the remaining code plan).
Example: changing the substitute code for "*" to "78"
Input sequence
A 2 2 1
B *
C 78
D <OK>
<F8>
E
The code can be deleted by pressing the F3 key under point C.
10.7.13.2 Substitute code for #
Since DP terminals cannot transmit "#", you need a substitute code of up to 2 digits to activate
services. The default substitute code is "76".
This code can be changed (on the basis of the remaining code plan).
Example: change the substitute code for "#" to "79"
Input sequence
A 2 2 2
B *
C 79
D <OK>
<F8>
E
The code can be deleted by pressing the F3 key under point C.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Substitute codes for *
Change input
Select substitute code 78
Confirm input
Return to Start menu
Meaning
Substitute code for #
Change input
Select substitute code 79
Confirm input
Return to Start menu
Programming guide
System settings
Display
Code: 75
Code
Code: 78
Code: 78
System administration
Display
Code: 76
Code
Code: 79
Code: 79
System administration
10-65