Table 8-1 Exception Table - Siemens Hicom 100 E Service Manual

Administration and maintenance
System programming in expert mode
Codes
A B C
27
27 1 1 1
27 2 2
27 2 2
27 2 2
27 3 3
27 2 4 4
27 3 5 5
27 4 6 6
27 7
27 8
27 9
A B
= SW 2.0.1+; = SW 2.0.2;
Table 7-4 Codes for expert mode
7-26
Least cost routing
Least cost routing, 0 = off/1 = on
Names of the network
1 Network A, alphanumeric input (max. 16 characters)
2 Network B, alphanumeric input (max. 16 characters)
Routing type, 1 = 1-level exception table/2 = 2-level exception table/
3 = interpretation table/4 = DICS
Access code (LCR type 1, 2 or 4 only), enter code 0–9, *, # (max.
10 characters)
Authorisation code (LCR type 1, 2 or 4 only), enter code 0–9, *, #
(max. 15 characters,
max. 10 characters up to SW 2.0.1+)
Exception table (LCR type 1, 2 or 4 only): select item number 1–50
and enter control numbers 0–9, *, # (max. 7 characters)
Dialled digits (LCR type 3 only) (max. 7 characters)
Interpreted digits (LCR type 3 only) (max. 7 characters)
Route (LCR type 3 only) (1 character)
C
= SW 2.1
Function
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99