Siemens Hicom 100 E Service Manual page 153

Administration and maintenance
System programming in expert mode
Codes
A B C
22
22 1 1 1
22 2 2 2
22 3 3 3
22 4 4 4
22 5 5 5
23
23 1 1 1
23 2 2 2
23 3 3 3
23 4 4
23 5 5
A B
= SW 2.0.1+; = SW 2.0.2;
Table 7-4 Codes for expert mode
7-22
Codes
Substitute code *, code 75
Substitute code #, code 76
Line code, select line 1–32 and enter new code (max. 3 characters:
801–832)
Route code, select route 1–4, then code position 1–10 (max. 10
codes for one route) and enter a new code (max. 5 characters)
CO code of main PBX, select route 1–4 and enter new code (max.
2 characters)
Doorphone setup
Entrance telephone, enter ext. number (max. 5 characters)
Door 1–4 as of SW 2.0.2
Receiving extension for doorbell, enter extension or group number
(max. 5 characters)
Door 1–4 as of SW 2.0.2
Door opener, 0 = off/1 = on
also 2 = on with DTMF, door 1–4, as of SW 2.0.2
Doorbell divert, external 0 = disable/1 = enable
DTMF door release, 0 = disabled/1 = enabled
C
= SW 2.1
Function
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99