Normal Extensions; Trunk Access With Active Code Lock (As Of Sw Version 2.0.2) - Siemens Hicom 100 E Service Manual

10.5.4.14

Normal extensions

The normal extensions are assigned to one of the 4 (up to SW 2.0.1+) or 15 (as of SW 2.0.2)
possible night reference extensions and thus have the same trunk access at night as these
reference extensions.
Example: ext. 13 and 14 should correspond to reference extension 11 and ext. 12 is the only
extension with unrestricted trunk access at night, see also Section 10.5.4.13.
Input sequence
A 1 4 2
B #
C 13
D <OK>
E *
F 1
11
G
H *
#
J
K 14
L <OK>
M *
1
N
O 11
<OK>
P
R <F8>
The class-of-service assignment can be changed by entering another reference extension
under point G or O.
10.5.4.15

Trunk access with active code lock (as of SW version 2.0.2)

Trunk access for extensions with active code locks can be set for the entire system as of SW
version 2.0.2. The classes of service correspond to the values specified in the chapter "Classes
of service as of SW 2.0.2", see Section 10.5.4.2.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Trunk access at night for ext. 11 on line
1
(select ext. 11–74 directly with "#",
lines 1–32 by scrolling with "+" and "–
")
Select extension
Enter extension 13
Confirm input
Change input
Select reference ext.
Enter reference ext.
Confirm input
Select extension
Enter extension 14
Confirm input
Change input
Select reference ext.
Enter reference ext.
Confirm input
Return to Start menu
Programming guide
Station attributes
Display
Ext. 11, line 1: outward
restricted
Ext.:
Ext.: 13
Ext. 13: as for ext. 12
Change for ext. 13:
Ref. for ext. 13:
Ref. for ext. 13: 11
Ext. 13: as for ext. 11
Ext.:
Ext.: 14
Ext. 14: as for ext. 12
Change for ext. 14:
Ref. for ext. 14:
Ref. for ext. 14: 11
Ext. 14: as for ext. 11
System administration
10-37