Call Allocation For Internal Calls; Changing Analogue Destination Extensions At Night - Siemens Hicom 100 E Service Manual

Input sequence
C 23
D <OK>
E *
F 11
G <OK>
H <F8>
10.6.5.2

Changing analogue destination extensions at night

In the case of incoming analogue trunk calls at night, each analogue trunk line can be assigned
any destination extension.
Example: call group 883 is to be programmed as an analogue destination extension at night
for lines 2 and 3, see also Section 10.6.2.
Input sequence
A 1 5 1 8
B +
C *
D 883
E <OK>
F +
G *
883
H
J <OK>
<F8>
K
Call group 883 is now the new analogue destination extension at night for lines 2 and 3.
The default call destination list assigned to call group 883 at night remains 15.
10.6.6

Call allocation for internal calls

In general, extensions are dialled internally in accordance with the internal extension numbers
entered. (The PC tool "Assistant L" is required to change internal extension numbers.)
Each internally dialled extension is assigned a call destination list which specifies the
exact call procedure (e.g. call forwarding, forwarding time, etc.).
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Enter extension 23
Confirm input
Change input
Assignment to list 11
Confirm input
Return to Start menu
Meaning
Call allocation per line, night
(select line 1–32 with "+" and "–" or
directly with "#")
Scroll to line 2
Change input
Destination extension = group 883
Confirm input
Scroll to line 3
Change input
Destination extension = group 883
Confirm input
Return to Start menu
Programming guide
Station attributes
Display
List for ext. no.: 23
List for ext. no. 23: 14
List for ext. no.: 23
List for ext. no. 23: 11
List for ext. no. 23: 11
System administration
Display
Line 1: 11
Line 2: 11
Line 2:
Line 2: 883
Line 2: 883
Line 3: 11
Line 3:
Line 3: 883
Line 3: 883
System administration
10-45