Table 6-2 Error Messages For Network Settings - Siemens Hicom 100 E Service Manual

Setting
Assign codes
Table 6-2 Error messages for network settings
Error messages must be acknowledged before you proceed with programming.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Message
Collision with 221
substitute code *
Collision with 222
substitute code #
Collision with 223
line X
Collision with
internal console code
Collision with 224
route X, pos. X
Collision with 1616
digit repetition
Networking (Hicom 112/118 only)
Remarks
Collision with the substitute code for *
Collision with substitute code for #
Collision with a line code
Collision with the console code (inter-
cept console)
Collision with specified route code
when entering route codes
Digit repetition was deactivated when
attempt was made to assign additio-
nal route codes
Initial operation
6-17