Important Information; Safety Information; Hicom 100 E Version 2.1 , Service Manual - Siemens Hicom 100 E Service Manual

1

Important Information

1.1

Safety information

The following information is aimed at service personnel and authorized specialists. Only these
persons are permitted to work on the installation.
Read through all information on the equipment carefully, and follow all safety information. Also
obtain information concerning the emergency numbers.
Always contact your manager before starting any work where the necessary safety does not
appear to be present (e.g. hazards due to gas explosion or humidity).
Safety symbols
Potential sources of danger in this description are identified by means of the following symbols:
!
Danger
!
Warning
!
Caution
Further symbols for defining the source of danger in greater detail
Electricity Weight
* Electrostatic discharge
1. These symbols are not usually used in the manual. They're an explanation of the symbols that can be depict-
ed on the systems.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
This symbol calls attention to a situation that could cause serious
injury or death to a person.
This symbol calls attention to a situation that could cause serious
injury to a person.
This symbol calls attention to a situation that could damage or
destroy hardware or software.
This symbol identifies useful informations.
Heat Fire Chemicals
ESD*
Important Information
Safety information
1
:
Laser
1-1