Codes/Extension Numbers Without The S Key And * Or - Siemens Hicom 100 E Service Manual

Administration and maintenance

Codes/extension numbers without the S key and * or #

7.3 Codes/extension numbers without the S key and * or #
The table below lists the system features that can be activated by codes. S
ed as normal telephones.
U DTMF
P0/E
11–74 11–74
77 77
78 78
79 79
801–832 80–832
84 84
85 85
86 86
87 0 87 0
Fax
87 1 87 1
DDI
87 2 Fax/DDI 87 2
87 3 An-
nounce-
ment before
notification
881–888 881–888 881–888
89 89
9 (GBR 0) 9 (GBR
0)
0 (GBR 9) 0 (GBR
9)
* Also applicable for optiset entry
Table 7-1 Codes/extension numbers without S key and * or #
7-2
*
DP/S
0
11–74 Internal extension numbers for U
75 Substitute code for * (DP and ISDN telephones)
76 Substitute code for # (DP and ISDN telephones)
77
78 Not used
79
801–832 Selective line seizure for max. 32 lines or B-channels
only, if automatic the line seizure is deactivated.
84 Route 2
85 Route 3
86 Route 4
87 0 Pseudo ports for fax/DDI module (DVN only); a fax/DDI
87 1 module can be entered as a DVN destination for exter-
87 2 nal calls using these numbers
881–888 ext. numbers of user groups 1 to 8
89 Not used
9 (GBR 0) Attendant console
0 (GBR 9) Route 1
Codes without S key and * or #
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
terminals are treat-
0
, a/b, S ports
PN 0
,
07/99