Hicom - Siemens Hicom 100 E Service Manual

Call management / incoming calls
Call management is selected via "System administration" by entering *95 31994 under menu
item 15 = Incoming calls.
The call management submenus are displayed under menu 15 = Incoming calls.
Description of the 4 blocks that make up call management
The overview shown in Figure 6-4 was divided into 4 blocks which show the logical sequence
of customer-specific programming.
Description of blocks:
Block 1 Incoming calls MSI lines (analogue trunk lines)
Call allocation line, day MSI lines are first assigned to an internal extension for day
1517
1518 Call allocation
line, night
Call allocation continues in block 2 (call signalling).
1513 Intercept console day
1514 Intercept console night
Intercept criteria
1515
Call allocation continues in block 2 (call signalling).
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
and night service.
Block 1 DDI line (S0, CorNet, QSig)
DDI calls which are intercepted are signalled at the day/
night intercept console with the default setting. This app-
lies to all lines.
The day/night intercept console must first be deleted if a
different intercept console is required for each line.
Intercept console entries per line are made under Call al-
location line, day 1517/night 1518.
No answer, busy, invalid, incomplete, recall
Initial operation
Call management (CM)
6-9