Switching To Mute During A Call; Ending A Call; Call Pickup To A Line Key - Siemens OpenStage 5 User Manual

Step by Step
Mute
Mute
Cancel/Release
Line

Switching to Mute During a Call

You can consult with other people in the room without
the person on the other end of the line hearing what is
said.
Prerequisite:You are conducting a call. The function
key "Mute" is configured, see ! page 54.
Activating the Mute Function
Press the Mute key. The LED lights up, the microphone
on the handset is deactivated.
Deactivating the Mute Function
Press the Mute key. The LED goes out, the microphone
on the handset is reactivated.

Ending a Call

t
Replace the handset.
or
Press the Cancel/Release key, if this key is configured
(! page 54). The call is cleared down.

Call Pickup to a Line Key

Prerequisite: A line key with a separate telephone
number is configured on your telephone (consult the ad-
ministrator).
The telephone rings. The LED for the line key blinks rap-
idly.
n
Lift the handset.
Press the key. The LED lights up.
Incoming Calls
15