Digit Repetition (Menu 16 16); Route Seizure (Menu 16 17); Error Messages For Network Settings - Siemens Hicom 100 E Service Manual

Initial operation
Networking (Hicom 112/118 only)
6.10.7

Digit repetition (menu 16 16)

Defines whether the dialled route code is automatically repeated. If digit repetition is
deactivated, only one route code per route can be programmed. Digit repetition must be
activated if several route codes are to be programmed, i.e. it prefixes the next extension number
dialled (only to be set up if Hicom 100E is networked with a main PBX which involves a shared
extension number plan).
6.10.8

Route seizure (menu 16 17)

This setting can be used to assign each route a cyclic or linear seizure sequence for the lines
of this route.
6.10.9

Error messages for network settings

The messages shown below may appear in the display of your system telephone with the
internal extension number 11 or 12. These messages are directly related to the network
settings:
Setting
Activate automatic line
seizure
Assign route other than
1 to line
Program route code
Activate digit repetition Collision with 1611
Deactivate digit repeti-
tion
Assign codes
Table 6-2 Error messages for network settings
6-16
Message
Collision with 1612
route assignment
Collision with 1616
digit repetition
Collision with 1611
auto. line seizure
Collision with 1616
digit repetition
auto. line seizure
Collision with 224
route X, pos. X
Collision with 224
route code
Collision with
int. extension number
Remarks
Not all lines configured in route 1
Digit repetition activated
(note all 4 routes)
Automatic line seizure is activated
Digit repetition is deactivated
Automatic line seizure is activated
More than one route code is assi-
gned
Collision with one of the route codes
entered
Collision with one of the internal ex-
tension numbers
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99