10.7.15.2
Digit suppression
The dialled extension number output in the data record is displayed in full and without digit
suppression by default. Digit suppression can be activated if you want the last three digits of
the dialled extension number to be replaced by a "?".
Example: digit suppression is to be activated.
Input sequence
A
1 1 3 2
*
B
C
1
D
<OK>
E
<F8>
Digit suppression can be deactivated by entering "0" under point C.
10.7.15.3
Recording incoming calls
Incoming calls are not output in the data record (default setting). These calls can be included
in the output.
Example: incoming calls are to be output in the data record.
Input sequence
A
1 1 3 3
*
B
C
1
D
<OK>
E
<F8>
The output of incoming calls can be overridden by entering "0" under point C.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Ext. number display
Change input
Non-compressed output format
Confirm input
Return to Start menu
Meaning
Output of incoming calls
Change input
Output incoming calls
Confirm input
Return to Start menu
Programming guide
System settings
Display
Digit suppression: no
Digit suppression:
Digit suppression: yes
Digit suppression: yes
System administration
Display
Output: no
Output:
Output: yes
Output: yes
System administration
10-73