Defining The Number Of Announcement Without Notification Options; Defining Analogue Access For Each Option - Siemens Hicom 100 E Service Manual

Programming guide
Programming expansion modules
10.8.3.4 Defining the number of announcement without notification options (as of
SW version 2.0.2)
The number of fax/DDI modules specified as "announcement without notification options" is to
be entered.
Example: a fax/DDI module is to be programmed as an announcement without notification
option.
Input sequence
A 2 4 4(as of SW
2.0.2)
B *
C 1
D <OK>
E <F8>
A fax/DDI option can be deleted by entering "0" under point C.
The second step entails defining analogue access to the system.
10.8.3.5

Defining analogue access for each option

Each fax/DDI module requires individual access (wiring) to the system via an a/b interface. The
extension number of the relevant a/b interface is to be entered.
Example: a connected fax/DDI module has system access to the a/b interface with extension
number 23.
Input sequence
A 2 4 4 (up to
SW2.0.1+)
2 4 5 (as of
SW2.0.2)
B *
C 23
D <OK>
<F8>
E
An access extension number can be deleted with the F3 key under point C.
10-84
Meaning
Number of announcement options
Change input
Enter number
Confirm input
Return to Start menu
Meaning
Terminal ports
(select option 1–4 with "+" and "–" or
directly with "#")
Change input
Enter access extension number
Confirm input
Return to Start menu
Display
Number: 0
Number
Number: 1
Number: 1
System administration
Display
Ext. no. for option 1: –
Ext. no. for option 1:
Ext. no. for option 1: 23
Ext. no. for option 1: 23
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99