Siemens Hicom 100 E Service Manual page 159

Administration and maintenance
System programming in expert mode
Codes
A B C
30
30 1 1
30 2 2
30 3 3
30 4 4
5 5
6 6
7 7
A B
= SW 2.0.1+; = SW 2.0.2;
Table 7-4 Codes for expert mode
7-28
Remote administration
DTMF access, 0 = no access/1 = access as master/2 = access as
slave/3 = master and slave
ISDN access trunk, 0 = release procedure/1 = Logon (DDI) without
code/2 = Logon (DDI) with code
Other accesses, 0 = release procedure/1 = Logon (DDI) without
code/2 = Logon (DDI) with code
DDI no., remote administration, max. 11 characters
Internal ext. no., remote administration, max. 5 characters
Reset access code (6 characters): 0 = reset
Automatic customer data printout, access 0 = no/1 = yes
C
= SW 2.1
Function
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99