Siemens Hicom 100 E Service Manual page 248

As of SW version 2.0.1+, the following also applies:
The intercept console at night can be cancelled by pressing the F3 key under point C. In this
way, it is possible to assign an individual night-time intercept console to each line (e.g. in the
case of different basic accesses).
Example: ext. 12 is the night intercept console for the 1st basic access (line 1 and 2).
Call group 882 is the night intercept console for the 2nd basic access (line 3 and 4).
1. The actual "night intercept console" under code <1514> is deleted, see above.
2. The required intercept console extensions are assigned to lines 1 to 4.
Lines in a shared basic access must always be assigned the same intercept console
extension!
Input sequence
A 1 5 1 8
B *
C 12
D <OK>
E +
F *
12
G
<OK>
H
J +
K *
882
L
M <OK>
N +
O *
882
P
R <OK>
S <F8>
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Intercept console per line at night
(select line 1–32 with "+" and "–" or
directly with "#")
Change input
Select intercept console
Confirm input
Scroll to line 2
Change input
Select intercept console
Confirm input
Scroll to line 3
Change input
Select intercept console
Confirm input
Scroll to line 4
Change input
Select intercept console
Confirm input
Return to Start menu
Programming guide
Station attributes
Display
Line 1: 11
Line 1:
Line 1: 12
Line 1: 12
Line 2: 11
Line 2:
Line 2: 12
Line 2: 12
Line 3: 11
Line 3:
Line 3: 882
Line 3: 882
Line 4: 11
Line 4:
Line 4: 882
Line 4: 882
System administration
10-53