[Restrict User Access]; [Expert Adjustment] - Konica Minolta bizhub 4050 User Manual

5.1 [System Settings]

[Restrict User Access]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access]
Configure a setting to restrict user's change or deletion operations.
Settings
[Restrict Access to Job
Settings]
[Delete Other User
Jobs]
[Registering and
Changing Addr.]
[Restrict Operation]
[Restrict Broadcast-
ing]

[Expert Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment]
Correct a defective print image.
Settings
[Printer Adjustment]
[Leading Edge Ad-
justment]
[Centering]
[Leading Edge Ad-
justment (Duplex
Side 2)]
[Centering (Duplex
Side 2)]
[Density Adjustment] -
[Thick/1200dpi]
[Monochrome Density
Adj.]
[List Output]
[Halftone 64]
[Halftone 128]
[Halftone 256]
[Gradation]
[Life]
[New Release]
[Description of Utility Keys]
Description
Specify items that cannot be changed by the user.
Select whether or not to allow the user to delete other user jobs if user authen-
tication is used on this machine.
If [Allow] is selected, you can delete other user jobs on the [Job List] screen.
[Restrict] is specified by default.
Select whether or not to allow the user to register or change destinations.
[Allow] is specified by default.
Specify items for which access is restricted.
Select whether or not to prohibit the user from sending faxes to multiple des-
tinations. To prohibit broadcast, select [Yes].
[OFF] is specified by default.
Description
Adjust the print start position and defective print images.
Select the type of paper (plain paper, thick paper, or envelope) for adjusting the
print position. Adjust the print start position at the leading edge of the paper
relative to the paper discharge direction for each paper type.
[0.0 mm] is specified by default.
Select the paper tray for adjusting the print position. Adjust the print start po-
sition at the left-hand edge of the paper relative to the paper discharge direc-
tion for each paper tray.
[0.0 mm] is specified by default.
Select the type of paper (plain paper) for adjusting the print position. Adjust the
print start position at the leading edge of the back side of the paper relative to
the paper discharge direction for printing the back side during 2-sided printing,
for each paper type.
[0.0 mm] is specified by default.
Select the paper tray for adjusting the print position. Adjust the print start po-
sition at the left-hand edge of the paper relative to the paper discharge direc-
tion for printing the back side during 2-sided printing, for each paper tray.
[0.0 mm] is specified by default.
Adjust the image density when printing on thick paper or at 1200 dpi.
The larger the number, the darker the background.
[0] is specified by default.
Adjust the density of an image to be printed in black and white.
The larger the number, the darker the background.
[0] is specified by default.
Print halftone patterns.
Print a halftone pattern with a density of 25%.
Print a halftone pattern with a density of 50%.
Print a halftone pattern with a density of 100%.
Print a gradation pattern.
Configure a setting to replace consumables.
Reset the counter value after replacing the Maintenance Kit or installing the
Finisher.
5
5-4