Making Folded Booklets: Fold & Staple/Multi Half-Fold; Functional Overview - Konica Minolta bizhub 1250 User Manual

4
4.3 Making Folded Booklets: Fold & Staple/Multi Half-Fold
4.3.1

Functional Overview

The machine with Saddle Stitcher SD-513 installed provides the following functions.
Output mode
[Fold&Staple] +
[(1)Fore-edge Trim-
ming] set to [OFF]
[Fold&Staple] +
[(1)Fore-edge Trim-
ming] set to [ON]
[Multi Half] +
[(1)Fore-edge Trim-
ming] set to [OFF]
[Multi Half] +
[(1)Fore-edge Trim-
ming] set to [ON]
d
Reference
Please check paper information before use. See "Paper Information" (page 2-12) for details.
NOTICE
The multi half-folded and stapled sets will be delivered onto the bundle exit tray. Set up the bundle exit tray
extension, and follow the preparation process before opening the stopper. Failing to carry out the prepara-
tion may lead to output sheets falling off the bundle exit tray. It could also cause the sensor to fail to detect
the output full condition.
4-22
Making Folded Booklets: Fold & Staple/Multi Half-Fold
Details
Using Booklet as an ap-
plication function in
combination, creates a
multiple page signature
booklet folded and sta-
pled at two or four posi-
tions (saddle stitched) in
the center.
Trims the fore edge of
booklets created using
[Fold&Staple].
Using Booklet as an ap-
plication function in
combination, doubles up
to 5 sheets of printed set.
Trims the fore edge of
doubled sheets created
using [Multi Half].
Illustration
4.3
Saddle Stitcher SD-513