Communicating To Certain Ports - Christie Roadie HD+35K User Manual

2.7.5 Communicating to Certain Ports

If desired, you can isolate your RS-422 communications so that they are not relayed to any other network by
selecting the RS232 and Ethernet Joined option for "Network Routing" in the
Messages from the Ethernet will reach the RS-232 network, and vice versa, but RS-422 messages will not.
To isolate your Ethernet from the serial networks, select the RS232 and Ethernet Joined option so that all
serial messages will be relayed to all serial ports, but Ethernet communications will not (and vice versa).
To keep each network communication links separate from each other, select the Separate option.
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
RS-232
Figure 2-43 Joining All Networks
Figure 2-44 Port Communication Menu
Section 2: Installation and Setup
RS-232
1. Separate
2. RS232 and RS422 Joined
3. RS232 and Ethernet Joined
4. All Joined
Communications
RS-422
menu.
2-39