Christie Roadie HD+35K User Manual page 141

NOTE:
Show Blending Overlap appears as Reserved when Christie TWIST is installed.
Other Functions
For convenience, the
color and/or test pattern, or for working with colors or the lamp. Such functions duplicate those provided
elsewhere in the Menu system.
Edge Blending Procedure
Before You Begin. Make sure your source hardware and/or software can supply a tiled image for the number
of projectors in use, and that the tiling includes overlapping data of approximately 12.5-25% along shared
edges (see Figure
Physically align the projectors and images from your intended external source, then match colors and
Brightness Uniformity.
IMPORTANT! For a shared edge, all Blend procedures and settings should be identical on BOTH projectors.
1. Start with 2 full-screen projector images overlapping by approximately 12.5-25% each. Display a full
white field test pattern from both.
Edge Blending
2. In the
NOTE:
If the optional Christie TWIST module is installed, a drop-down list replaces this check box (see right).
Select the desired user-defined blend created for your current warp; no further blending at the projector is
required. Or, to simply edge blending a non-warped flat image, select "Standard" and continue with Step 3.
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Figure 3-46
Edge Blending
secondary menu also includes related options for enabling a specific
3-46). Tiling is not built into this model of projector.
secondary menu, enable the top check box to activate all controls.
12.5-25 %
Overlap Example
Section 3: Operation
3-75