List Of Components; Key Features - Christie Roadie HD+35K User Manual

Section 1: Introduction

1.3.2 List of Components

The following components make up a complete Roadie HD+35K system (refer to
• Projection Head. Includes:
• Line cord
• Standard IR remote (includes batteries for IR use, and 25' cable for wired use)
• Security keys for lamp and Igniter service access, plus assorted Allen keys
• Lamp Ballast (7 kW)
• Cable kit (includes 2 lamp power cables and 2 communication/control cables)
• Choice of lamp kit (includes protective gear)
• Choice of lens (Anamorphic lens and mount are also both optional)

1.3.3 Key Features

General
• 3-chip electronics with true 2048 x 1080 native resolution
• Split-projector design; ballast is separate from projection head
• Versatile electronic and optical scaling to automatically maximize the display
• 10-bit digital processing (8-bit for interlaced high-definition video)
• Can be rigged, flown and/or stacked with optional FredFrame™ hardware
Lamps / Light Output
• Choice of four Xenon bubble lamp sizes and ratings
• Light output of 32,500 ANSI lumens (35,000 centre lumens) (6kW lamp)
• Standard achievable contrast ratio 500:1 ANSI, up to 2800:1 full field ON/OFF
• LampLOC™ motorized lamp alignment (auto or custom adjustment)
• LiteLOC™ for maintaining brightness over time
• Internal electromechanical shutter for quick picture mute and black stand-by
• Optional internal optical components for improved contrast ratio and/or wider color gamut
Inputs
There are two different types of input face plate configurations (model dependant). Refer to
Figure 1-2. These configurations may include the following inputs:
• One analog RGBHV/YPbPr input with 5 BNCs
• One DVI-I input for either digital RGB/YCrCb or analog RGB/YPbPr signals
• One analog composite-video input, one analog S-video input
• Built-in multi-standard decoder (NTSC, NTSC 4.43, PAL, PALM, PALN, PAL60, SECAM)
• One Dual SD/HD-SDI input (installed in one of two optional input slots)
• Up to 220 MHz pixel rate
• Compatible with all current HDTV formats
• Motion adaptive de-interlacing of 50 fps- and 60 fps-originated standard and high-definition interlaced
sources
• Inverse telecine de-interlacing of film-originated standard and high-definition interlaced material with 3:2
drop-down (60 fps) or 2:2 drop-down (50 fps).
For simplicity, this manual refers to the configuration shown in
1-4
Figure
Figure 1-1 only.
Roadie HD+35K User Manual
3-1):
Figure 1-1 and
020-100340-02 Rev. 1 (01-2010)