Dvi Input Module; Dual Sd/Hd-Sdi Module - Christie Roadie HD+35K User Manual

Appendix D: Optional Input Modules
The following optional input modules are currently available, and can be installed in either option slot in the
INPUT 5
projector (
NOTE: Any audio connectors shown are non-functional in this projector.
D.1 DVI Input Module
This module can display digital video input signals conforming to the DVI (Digital Visual Interface) single-
channel standard.
Features
• Supports Digital Visual Interface (DVI) single-channel
• Supports VESA Extended Display Identification Data (EDID )
• Provides an active-loop-through using a DVI connector (conforming to the DVI Specification)
D.2 Dual SD/HD-SDI Module
NOTE: Standard with this projector.
This module accepts one or two independent standard- or high-definition serial digital inputs, decodes them for
processing in the main electronics of the projector, and outputs 10-bit RGB/YCbCr 4:2:2 video. Either input
can be set as the active primary or secondary part of a Picture-in-Picture display, and either input can be looped
through to one (or both) of the module's BNC outputs.
Refer to Section 2.5 Connecting Sources
NOTE: Older Input cards not listed may be supported by the Roadie HD+35K.
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
INPUT 6
or ). Contact your dealer for a complete and up-to-date listing.
Figure D-1 DVI Input Module
for more information.
D-1