Image Settings Menu - Christie Roadie HD+35K User Manual

Blanking (Top, Bottom, Left, and Right) Options
Blanking
Select a
Position
menu. Crop the image as desired so that unwanted
edges are removed from the display (changed to black as shown
in Figure 3-16). Blanking defines the size of the
window, creating an area of interest. Range of adjustment
depends on the source resolution and other factors for your
application.
NOTE:
Blanking a PIP image resembles zoom (refer to
31 ). For example, left Blanking zooms the right side of the
PIP image; Right Blanking zooms the left side. There are
no black bars.
Plug & Display (EDID) Option
Plug & Play
Select the
menu. By default, a
according to the EDID information provided by the projector. To override
this information and display in a different format (for example, if your
Plug & Play
[EDID] device does not support the projector's resolution
and/or frequency), select the desired
from the list.
Any daisy-chained projectors also displays according to the chosen Plug
& Play (EDID) format.
= Extended Display Identification Data standard.
EDID

3.6.3 Image Settings Menu

Image Settings
Select the
image without affecting its size or position. Changes made to the
immediately and are saved when you exit the menu. Options not available for the projector model or source are
disabled and appear dim (gray).
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Advanced Size and
option from the
Advanced Size and Position
option from the
Plug & Play
(EDID) source outputs a signal
Plug & Play
(#2 option) from the
Figure 3-17 Image Settings Menu
1080
Active Input
1080
Figure 3-
Figure 3-16 Blanking of a Primary Image
(EDID) resolution
Main
menu. Options in the
Image Settings
Section 3: Operation
Example: incoming image
Image
Blanking
(unused pixels)
2048
Example: With Blanking
2048
Image Settings
menu alter your
menu are applied
3-27