Christie Roadie HD+35K User Manual page 111

If you have a simple serial network with only one type of linking (RS-232 or RS-422) the type of network
routing does not matter.
RS232 and RS422 Joined. Messages to and from any serial port is also relayed to all other serial ports. Use
when there is only one physical link between any two projectors, but which might be RS-232 or RS-422.
RS232 and Ethernet Joined. Messages to and from the RS-232 ports are also relayed to the Ethernet port, and
vice versa. Any RS-422 communications are isolated.
All Joined. All messages reach all ports, regardless of type.
Ethernet Settings Secondary Menu
NOTES: 1)
Not used for stand-alone projectors.
DHCP. Select this check box if you want a DHCP server to automatically change the projector's default IP
address (0.0.0.0) to one that is valid and unique for use on the current Ethernet network.
On networks without a DHCP server, or to simply override the automatic DHCP server function, clear the
check box, and enter the new "IP Address" settings desired. Remember that only a 0.0.0.0 address triggers the
DHCP addressing service only when the DHCP check box is enabled.
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Figure 3-26 Using the "Network Routing" Option
2)
Recommended for network administrators only.
Section 3: Operation
3-45